Laser 2 Down

Hey all, Laser 2 needs a little TLC, so please avoid using it until further notice. Laser 1 and Laser 3 (in Flex Space) are available for use until Laser 2 is fixed. Thank you!

Laser 2 is operational and available for members again. Just a reminder: the air assist pump (on the floor to the left of the machine) should be turned on when you are operating the laser and turned off when you are done.

Would it be possible to set it up on a power strip such that the switch to turn the pump is easily accessible? Its been a while since I used the lasers but last time I recall that being in an awkward spot

Yes I think we can do that. Good idea Gary.

I’ve relocated the vacuum pump to the right side of the machine, which is the most convenient spot the length of the air hose would allow.

Good compromise, but I was thinking something like this,1625w-switch/dp/B08P7SVP5T/ref=asc_df_B08P7SVP5T/?tag=hyprod-20&linkCode=df0&hvadid=475715987248&hvpos=&hvnetw=g&hvrand=15467846909590396983&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9003006&hvtargid=pla-1088503203050&psc=1